High‐Throughput Magnetron‐Sputtered Compositionally Graded TiZrNbMoAl Nitride Coatings with Enhanced Tribological Performance
Advanced Engineering Materials · 08.07.2026 · 28 (13)
DOI: 10.1002/adem.70707 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 18.03.2026. Verfasst von Qin Cui und 7 weiteren Autor:innen. Die Arbeit nennt 82 Literaturangaben. Gefördert von: NPIC.
Abstract (Originalsprache)
To address the urgent need for ultra‐wear‐resistant protective coatings on structural alloys under extreme tribological conditions, this study employed a high‐throughput magnetron sputtering approach to efficiently synthesize four compositional‐graded TiZrNbMoAl nitride‐coating zones under identical and equidistant geometric conditions, enabling systematic investigation of composition–structure–property relationships; comprehensive characterization (FESEM/EDS, GIXRD, XPS, nanoindentation, tribometry) confirmed thickness (1.0–1.3 μm), dense microstructures, and dominant face‐centered cubic (FCC) phase across all zones, with the TiZrNb‐near coating exhibiting the finest nanograins (8.08 nm) induced by atomic size mismatch–driven lattice distortion, resulting in exceptional hardness (28.36 ± 1.68 GPa), lowest residual stress (−0.82 GPa) and friction coefficient (0.102 ± 0.003), and minimal wear rate (1.82 ± 0.07 × 10 −8 mm 3 /(N·m)), two orders of magnitude lower than bare AISI304 steel under polyalphaolefins (PAO) oil lubrication, while XPS‐verified solid‐solution nitrogen incorporation (
Förderung
- NPIC
Zitieren
APA
Cui, Q., Gao, J., Zhang, C., Peng, S., Sun, D., Liu, G., Du, H., & Li, F. (2026). High‐Throughput Magnetron‐Sputtered Compositionally Graded TiZrNbMoAl Nitride Coatings with Enhanced Tribological Performance. Advanced Engineering Materials, 28(13). https://doi.org/10.1002/adem.70707
Vancouver
Cui Q, Gao J, Zhang C, Peng S, Sun D, Liu G, et al. High‐Throughput Magnetron‐Sputtered Compositionally Graded TiZrNbMoAl Nitride Coatings with Enhanced Tribological Performance. Advanced Engineering Materials. 2026;28(13). doi:10.1002/adem.70707
BibTeX
@article{Cui2026,
author = {Cui, Qin and Gao, Jianxiong and Zhang, Cunxiu and Peng, Shuang and Sun, Deen and Liu, Gang and Du, Hongji and Li, Fengji},
title = {High‐Throughput Magnetron‐Sputtered Compositionally Graded TiZrNbMoAl Nitride Coatings with Enhanced Tribological Performance},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {13},
doi = {10.1002/adem.70707}
}
EUVIMED