EUVIMEDEUVIMED entdecken
Crossref

Enhancing the Mechanical Properties and Pitting Corrosion Resistance of AA7075 Alloy by Surface Rolling Treatment

Gengzhe Shen, Tiansong Huang, Wenhao Zhao, Lexi Ouyang, Guoxian He, Jingjing Guo, Zhenmin Lai, Dongyang Zhao, Xiao Liu, Suping Tan, Ke Hu

Advanced Engineering Materials · 08.07.2026 · 28 (13)

DOI: 10.1002/adem.202503142 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 18.04.2026. Verfasst von Gengzhe Shen und 10 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the regulation of surface strengthening of AA7075 aluminum alloy via rolling and cold rolling processes, so as to enhance its mechanical properties and pitting corrosion resistance. It further explores the influence mechanism of surface rolling treatment on the enhancement of mechanical properties and surface properties of AA7075 aluminum alloy. Samples of 30‐S‐Al, 50‐S‐Al, and annealed alloy were employed to quantitatively analyze the effect of surface strengthening of 30‐S‐Al and 50‐S‐Al on their microstructure evolution process. The 50‐S‐Al treatment proved most effective, with a surface hardness of 416 HV 5 ,approximately double the annealed sample's hardness and an 80% increase. Characterization revealed that rolling significantly increases surface dislocation density. Crucially, 50‐S‐Al fractures and disperses second‐phase particles, a key strengthening mechanism for plasticity. Corrosion resistance was evaluated via hydrogen evolution and electrochemical tests. The 50‐S‐Al treated alloy exhibited superior performance: a self‐corrosion current density of 125.57 µA/cm 2 , a self‐corrosion potential of −0.922 V, a notably higher pitting potential (increase of 0.15 V), and the highest impedance (110,160 Ω·cm 2 ). A fine and uniform microstructure is formed on the surface layer of the 50‐S‐Al alloy, and the grain size refined in the deep layer is sufficiently small. This promotes the passivation enhancing pitting and corrosion resistance.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Shen, G., Huang, T., Zhao, W., Ouyang, L., He, G., Guo, J., Lai, Z., Zhao, D., Liu, X., Tan, S., & Hu, K. (2026). Enhancing the Mechanical Properties and Pitting Corrosion Resistance of AA7075 Alloy by Surface Rolling Treatment. Advanced Engineering Materials, 28(13). https://doi.org/10.1002/adem.202503142

Vancouver

Shen G, Huang T, Zhao W, Ouyang L, He G, Guo J, et al. Enhancing the Mechanical Properties and Pitting Corrosion Resistance of AA7075 Alloy by Surface Rolling Treatment. Advanced Engineering Materials. 2026;28(13). doi:10.1002/adem.202503142

BibTeX
@article{Shen2026,
  author = {Shen, Gengzhe and Huang, Tiansong and Zhao, Wenhao and Ouyang, Lexi and He, Guoxian and Guo, Jingjing and Lai, Zhenmin and Zhao, Dongyang and Liu, Xiao and Tan, Suping and Hu, Ke},
  title = {Enhancing the Mechanical Properties and Pitting Corrosion Resistance of AA7075 Alloy by Surface Rolling Treatment},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {13},
  doi = {10.1002/adem.202503142}
}
Kostenlos starten →