EUVIMEDEUVIMED entdecken
Crossref

Effects of TiB 2 Addition on the Microstructure, Tribological Behavior, and Corrosion Resistance of Al 17 Cr 10 Fe 35 Ni 36 Mo 2 Coatings Fabricated by Laser Cladding

Hangtian Fan, Qi Zhang, JianYun Jin, Shaofu Kang, Minjie Shen, Zheng Zhang, Yaowei Yong, Dan Chen, Ziwen Yang

Advanced Engineering Materials · 03.06.2026 · 28 (11)

DOI: 10.1002/adem.202502902 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 29.03.2026. Verfasst von Hangtian Fan und 8 weiteren Autor:innen. Die Arbeit nennt 70 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High‐entropy alloys (HEAs) have attracted considerable research interest owing to their outstanding properties; nevertheless, their potential application as protective coatings continues to be an area of ongoing investigation. In this work, HEA composite coatings of Al 17 Cr 10 Fe 35 Ni 36 Mo 2 + x TiB 2 ( x = 0, 10, 20, 30 wt.%) were fabricated on 304 stainless steels via laser cladding, and the effects of TiB 2 particles on microstructure, tribological behavior, and corrosion resistance of the coatings were systematically studied. It was found that the Al 17 Cr 10 Fe 35 Ni 36 Mo 2 coating is primarily composed of face‐centered cubic and B2 phases. With the incorporation of TiB 2 particles, the formation of a σ phase and a significantly refined microstructure was obtained, leading to a substantial enhancement in microhardness and wear resistance. Notably, the 30 wt.% TiB 2 ‐reinforced HEA coating exhibited an average hardness of 878.5 HV 0.1 and a wear rate of 3.250 × 10 −6 mm 3 N −1 m −1 , representing a 105.4% increase and a 97.48% reduction compared to the unreinforced HEA coating (414.4 HV 0.1 , 1.29 × 10 −4 mm 3 N −1 m −1 ). The wear mechanism transitioned from adhesive wear to a combination of abrasive wear and oxidative wear since the addition of TiB 2 particles. Furthermore, TiB 2 promoted the formation of Ti 2 O 3 and TiO 2 in the passive film, thereby improving the corrosion resistance of the HEA composite coatings.

Zitieren

APA

Fan, H., Zhang, Q., Jin, J., Kang, S., Shen, M., Zhang, Z., Yong, Y., Chen, D., & Yang, Z. (2026). Effects of TiB 2 Addition on the Microstructure, Tribological Behavior, and Corrosion Resistance of Al 17 Cr 10 Fe 35 Ni 36 Mo 2 Coatings Fabricated by Laser Cladding. Advanced Engineering Materials, 28(11). https://doi.org/10.1002/adem.202502902

Vancouver

Fan H, Zhang Q, Jin J, Kang S, Shen M, Zhang Z, et al. Effects of TiB 2 Addition on the Microstructure, Tribological Behavior, and Corrosion Resistance of Al 17 Cr 10 Fe 35 Ni 36 Mo 2 Coatings Fabricated by Laser Cladding. Advanced Engineering Materials. 2026;28(11). doi:10.1002/adem.202502902

BibTeX
@article{Fan2026,
  author = {Fan, Hangtian and Zhang, Qi and Jin, JianYun and Kang, Shaofu and Shen, Minjie and Zhang, Zheng and Yong, Yaowei and Chen, Dan and Yang, Ziwen},
  title = {Effects of TiB 2 Addition on the Microstructure, Tribological Behavior, and Corrosion Resistance of Al 17 Cr 10 Fe 35 Ni 36 Mo 2 Coatings Fabricated by Laser Cladding},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {11},
  doi = {10.1002/adem.202502902}
}
Kostenlos starten →