Influence of an Oxygen‐Free Atmosphere on Diamond‐Single‐Grain Scratching of Ti–6Al–4V
Advanced Engineering Materials · 17.06.2026 · 28 (12)
DOI: 10.1002/adem.202502796 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 19.03.2026. Verfasst von Berend Denkena und 2 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study introduces a newly developed experimental setup for investigating the influence of controlled atmospheric conditions on single‐grain scratching of Ti–6Al–4V using natural diamond grains. The setup enables experiments under air, argon, and argon–silane atmospheres, allowing targeted investigation of oxygen‐related effects on material removal. High‐speed imaging captures chip formation and chip‐grain interactions during the process, while scanning electron microscopy and metallographic analysis provide complementary information on grain condition and material adhesion. Validation experiments demonstrate reliable and repeatable scratching under oxygen‐reduced and oxygen‐free conditions. Within the investigated parameter range, the measured normal and tangential forces show no clearly distinguishable systematic dependence on atmosphere, although potential effects may be masked by variations in grain geometry and effective depth of cut. In contrast, pronounced differences in chip adhesion behavior are observed. In ambient air, rapid chip detachment is promoted, associated with formation of a thin passivating titanium oxide layer. Under oxygen‐reduced conditions, suppressed oxidation leads to increased adhesion and local material accumulation on the grain. Overall, the results confirm the suitability of the methodology for in situ investigation of atmosphere‐dependent mechanisms and provide a foundation for future studies on oxygen effects in grinding and related machining processes.
Zitieren
APA
Denkena, B., Bergmann, B., & Zenger, M. (2026). Influence of an Oxygen‐Free Atmosphere on Diamond‐Single‐Grain Scratching of Ti–6Al–4V. Advanced Engineering Materials, 28(12). https://doi.org/10.1002/adem.202502796
Vancouver
Denkena B, Bergmann B, Zenger M. Influence of an Oxygen‐Free Atmosphere on Diamond‐Single‐Grain Scratching of Ti–6Al–4V. Advanced Engineering Materials. 2026;28(12). doi:10.1002/adem.202502796
BibTeX
@article{Denkena2026,
author = {Denkena, Berend and Bergmann, Benjamin and Zenger, Michael},
title = {Influence of an Oxygen‐Free Atmosphere on Diamond‐Single‐Grain Scratching of Ti–6Al–4V},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {12},
doi = {10.1002/adem.202502796}
}
EUVIMED