EUVIMEDEUVIMED entdecken
Crossref

Y and Sm Synergistically Enhance the Microstructure and Mechanical Properties of Extruded Mg–7Al–1Ca Magnesium Alloy

Chuang Li, Caixia Li, Dongyue Zhi, Lin Xue, Jiacheng Dong, Chuanqi Cheng, Xiaohua Zhang

Advanced Engineering Materials · 08.07.2026 · 28 (13)

DOI: 10.1002/adem.202502702 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 20.04.2026. Verfasst von Chuang Li und 6 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: Key Research and Development Program of Heilongjiang.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mg–Al–Ca series alloys have attracted significant research and development interest worldwide due to their high potential as magnesium alloys. However, their performance has yet to meet the anticipated targets. Alloying and plastic deformation are effective strategies for enhancing the overall properties of magnesium alloys. In this study, rare earth elements Y and Sm were added in equal proportion (Y:Sm = 2:1) to a Mg–7Al–1Ca alloy, followed by hot extrusion. The results show that the addition of Y and Sm effectively refined the grain size of the alloy. After extrusion, the Mg–7Al–1Ca–0.7Y–0.35Sm alloy exhibited the finest grains, with an average size of 13.16 μm. Furthermore, Y and Sm react with Al to form Al 2 Y and Al 2 Sm phases, which possess superior thermal stability. This process suppresses the formation of the β‐Mg 17 Al 12 phase. The Mg–7Al–1Ca–0.7Y–0.35Sm alloy also displayed a high recrystallization ratio of 81.6%, an increased average local misorientation angle, and a higher Schmid factor on the prismatic plane. The alloy exhibited a typical basal texture. The study concludes that the Mg–7Al–1Ca–0.7Y–0.35Sm alloy demonstrates the best combination of mechanical properties, achieving a tensile strength of 285 MPa, an elongation of 8.3%, and a hardness of 78.03 HV.

Förderung

  • Key Research and Development Program of Heilongjiang

Zitieren

APA

Li, C., Li, C., Zhi, D., Xue, L., Dong, J., Cheng, C., & Zhang, X. (2026). Y and Sm Synergistically Enhance the Microstructure and Mechanical Properties of Extruded Mg–7Al–1Ca Magnesium Alloy. Advanced Engineering Materials, 28(13). https://doi.org/10.1002/adem.202502702

Vancouver

Li C, Li C, Zhi D, Xue L, Dong J, Cheng C, et al. Y and Sm Synergistically Enhance the Microstructure and Mechanical Properties of Extruded Mg–7Al–1Ca Magnesium Alloy. Advanced Engineering Materials. 2026;28(13). doi:10.1002/adem.202502702

BibTeX
@article{Li2026,
  author = {Li, Chuang and Li, Caixia and Zhi, Dongyue and Xue, Lin and Dong, Jiacheng and Cheng, Chuanqi and Zhang, Xiaohua},
  title = {Y and Sm Synergistically Enhance the Microstructure and Mechanical Properties of Extruded Mg–7Al–1Ca Magnesium Alloy},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {13},
  doi = {10.1002/adem.202502702}
}
Kostenlos starten →