EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tribological Performance of 60NiTi Alloy Under Varying Contact Conditions and Elevated Temperatures in Linear Reciprocating Sliding

Anthony Onyebuchi Okoani, Miguel Angel Selles, Maziar Ramezani

Advanced Engineering Materials · 06.05.2026 · 28 (9)

DOI: 10.1002/adem.202502496 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 27.03.2026. Verfasst von Anthony Onyebuchi Okoani und 2 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GVA.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The tribological behaviour and thermal performance of as‐received 60NiTi alloy for load‐bearing and high‐temperature applications were investigated in this study. A linear reciprocating tribometer was used to evaluate the effects of applied load and temperature on 60NiTi alloy sliding against Al 2 O 3 under dry and water‐lubricated conditions. Initial surface characterisation confirmed the ordered intermetallic microstructure, consistent with characteristic x‐ray diffraction (XRD) peaks. The results showed that adhesive and abrasive wear dominated material loss under dry sliding at room temperature, leading to the highest wear volume (Wv = 2.2145 mm 3 ), whereas water lubrication reduced friction and produced moderate wear. At elevated temperatures (above 200°C), oxidative wear became the predominant mechanism, stabilising the sliding interface, lowering friction coefficients ( µ ≤0.33) and significantly reducing wear, with the lowest wear observed at 600°C. Scanning electron microscopy (SEM) and XRD analyses confirmed phase stability, while surface morphology and compositional analyses highlighted the protective role of oxide layers in improving wear resistance. These findings demonstrate that thermally driven oxidation, rather than adhesive or abrasive wear, governs the superior tribological performance of 60NiTi alloy at elevated temperatures, supporting its suitability for demanding high‐temperature applications.

Förderung

  • GVA

Zitieren

APA

Okoani, A. O., Selles, M. A., & Ramezani, M. (2026). Tribological Performance of 60NiTi Alloy Under Varying Contact Conditions and Elevated Temperatures in Linear Reciprocating Sliding. Advanced Engineering Materials, 28(9). https://doi.org/10.1002/adem.202502496

Vancouver

Okoani AO, Selles MA, Ramezani M. Tribological Performance of 60NiTi Alloy Under Varying Contact Conditions and Elevated Temperatures in Linear Reciprocating Sliding. Advanced Engineering Materials. 2026;28(9). doi:10.1002/adem.202502496

BibTeX
@article{Okoani2026,
  author = {Okoani, Anthony Onyebuchi and Selles, Miguel Angel and Ramezani, Maziar},
  title = {Tribological Performance of 60NiTi Alloy Under Varying Contact Conditions and Elevated Temperatures in Linear Reciprocating Sliding},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {9},
  doi = {10.1002/adem.202502496}
}
Kostenlos starten →