Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment
Advanced Engineering Materials · 22.07.2026 · 28 (14)
DOI: 10.1002/adem.202501946 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 26.04.2026. Verfasst von Femi John Akinfolarin und 2 weiteren Autor:innen. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates the electrochemical behavior and corrosion mechanisms of selective laser melted (SLMed) AlSi7Mg and AlSi10Mg alloys in both their as‐received and mechanically compressed states in a 3.5 wt.% NaCl solution environment. Electrochemical techniques, including open‐circuit potential (OCP), cyclic potentiodynamic polarization (CPP), and electrochemical impedance spectroscopy (EIS), were employed alongside microstructural examinations using scanning electron microscopy (SEM) and X‐ray diffraction (XRD) for phase analysis. The results indicate that compressive stress enhances corrosion resistance by promoting microstructural densification, pore closure and the formation of a more stable and adherent passive film. AlSi10Mg alloy exhibited superior corrosion performance due to its higher silicon content, which facilitates a refined and continuous eutectic Si network, reducing microgalvanic activity and improving passivity. AlSi7Mg demonstrated relatively lower corrosion resistance, attributed to its less stable passive film and susceptibility to localized attack. The findings demonstrate that compressive stress and increased silicon content synergistically enhance resistance to pitting corrosion by stabilizing the passive film and limiting localized breakdown, thereby improving the suitability of SLMed Al–Si–Mg alloys for chloride‐rich environments.
Zitieren
APA
Akinfolarin, F. J., Oguntuyi, S. D., & Olubambi, P. A. (2026). Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment. Advanced Engineering Materials, 28(14). https://doi.org/10.1002/adem.202501946
Vancouver
Akinfolarin FJ, Oguntuyi SD, Olubambi PA. Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment. Advanced Engineering Materials. 2026;28(14). doi:10.1002/adem.202501946
BibTeX
@article{Akinfolarin2026,
author = {Akinfolarin, Femi John and Oguntuyi, Samson Dare and Olubambi, Peter Apata},
title = {Electrochemical Evaluation of Compressed Selective Laser Melted AlSi7Mg and AlSi10Mg Alloys in Chloride Environment},
journal = {Advanced Engineering Materials},
year = {2026},
volume = {28},
number = {14},
doi = {10.1002/adem.202501946}
}
EUVIMED