EUVIMEDEUVIMED entdecken
Crossref

Surface Integrity and High‐Cycle Fatigue Performance of Laser Powder Bed Fusion TC4 Titanium Alloy Treated by Microscale Laser Shock Peening without Coating

Hongbing Li, Xiangfan Nie, Nan Jiang, Zhibin An, Shixi Li, Rubin Cui, Weifeng He, Xin Zhou, Li Yan, Peiwen Xu, Fayong Zhong

Advanced Engineering Materials · 2025-11 · 27 (22)

DOI: 10.1002/adem.202501699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 03.10.2025. Verfasst von Hongbing Li und 10 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces a novel surface modification technique, micro‐scale laser shock peening without coating (μLSPwC), to address three key limitations in laser powder bed fusion (L‐PBF) of TC4 titanium alloy components: detrimental tensile residual stress, excessive surface roughness, and insufficient fatigue resistance. Compared to conventional laser shock peening without coating (LSPwC), μLSPwC offers significant improvements in surface integrity and fatigue performance. Both μLSPwC and LSPwC reduce surface roughness (μLSPwC: 25.15 μm, LSPwC: 23.73 μm), eliminate 77–85% of surface spheroidized particles, and induce beneficial compressive residual stress. However, μLSPwC excels in three areas: 1) better control of oxygen content (1.38% increase vs. 6.95% increase), 2) superior surface hardening (435.8 HV vs 407.3 HV), and 3) higher compressive stress (−643.04 MPa vs −173.98 MPa). Rotating bending fatigue tests show an extraordinary life extension of 264 times for μLSPwC‐treated specimens (from 10 827 to 2.87 × 10 6 cycles), compared to a 10.4 times improvement for LSPwC. Fractographic analysis reveals μLSPwC induces sub‐surface crack nucleation at ≈200 μm, whereas LSPwC causes surface‐initiated failure. These findings highlight μLSPwC as an effective technique for improving both surface quality and fatigue durability in complex L‐PBF titanium alloy components.

Zitieren

APA

Li, H., Nie, X., Jiang, N., An, Z., Li, S., Cui, R., He, W., Zhou, X., Yan, L., Xu, P., & Zhong, F. (2025). Surface Integrity and High‐Cycle Fatigue Performance of Laser Powder Bed Fusion TC4 Titanium Alloy Treated by Microscale Laser Shock Peening without Coating. Advanced Engineering Materials, 27(22). https://doi.org/10.1002/adem.202501699

Vancouver

Li H, Nie X, Jiang N, An Z, Li S, Cui R, et al. Surface Integrity and High‐Cycle Fatigue Performance of Laser Powder Bed Fusion TC4 Titanium Alloy Treated by Microscale Laser Shock Peening without Coating. Advanced Engineering Materials. 2025;27(22). doi:10.1002/adem.202501699

BibTeX
@article{Li2025,
  author = {Li, Hongbing and Nie, Xiangfan and Jiang, Nan and An, Zhibin and Li, Shixi and Cui, Rubin and He, Weifeng and Zhou, Xin and Yan, Li and Xu, Peiwen and Zhong, Fayong},
  title = {Surface Integrity and High‐Cycle Fatigue Performance of Laser Powder Bed Fusion TC4 Titanium Alloy Treated by Microscale Laser Shock Peening without Coating},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {22},
  doi = {10.1002/adem.202501699}
}
Kostenlos starten →