Recent Advances in Crystalline Architecture and Defect Engineering of 3D‐Printed Metals for Biomedical Breakthroughs: A Comprehensive Review
Advanced Engineering Materials · 2025-08 · 27 (16)
DOI: 10.1002/adem.202500257 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 15.07.2025. Verfasst von Muhammad Abdullah Shadab Siddiqui und 5 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 641 Literaturangaben.
Abstract (Originalsprache)
This comprehensive review examines how additive manufacturing parameters govern microstructural evolution and properties in metallic biomaterials. Powder bed fusion, direct energy deposition, and binder jetting produce distinct crystalline architectures through cooling rates of 10³–10 8 K/s. Laser powder bed fusion yields refined CoCrMo microstructures (15.04 μm versus 102.47 μm cast), enhancing mechanical properties. Titanium alloys demonstrate tunable elastic moduli through compositional control, with Ti‐45Nb achieving 60–62 GPa compared to Ti‐6Al‐4V's 110 GPa, approaching cortical bone's 10–30 GPa range. Controlled porosity (40–60%) optimizes osseointegration while maintaining structural integrity. Magnesium alloys exhibit grain refinement from 4.0 to 3.0 μm with increasing zinc content (4–7 wt%), directly affecting corrosion behavior. Heat treatment at 1000 °C maximizes stainless steel strength and corrosion resistance through sigma phase optimization. Process windows are established for each system, with energy densities from 56 J/mm³ (NiTi) to 110 J/mm³ (Ti‐25Nb). Advanced characterization including millisecond‐resolution synchrotron XRD and 4D imaging reveals phase transformations and defect dynamics. Multiscale modeling frameworks predict properties from atomic to component scales, providing quantitative guidelines for engineering biomaterials with precisely tailored properties for next‐generation implants.
Zitieren
APA
Siddiqui, M. A. S., Mia, M. P., Hossain, M. A. K., Rabbi, M. S., Butt, H., & Alam, F. (2025). Recent Advances in Crystalline Architecture and Defect Engineering of 3D‐Printed Metals for Biomedical Breakthroughs: A Comprehensive Review. Advanced Engineering Materials, 27(16). https://doi.org/10.1002/adem.202500257
Vancouver
Siddiqui MAS, Mia MP, Hossain MAK, Rabbi MS, Butt H, Alam F. Recent Advances in Crystalline Architecture and Defect Engineering of 3D‐Printed Metals for Biomedical Breakthroughs: A Comprehensive Review. Advanced Engineering Materials. 2025;27(16). doi:10.1002/adem.202500257
BibTeX
@article{Siddiqui2025,
author = {Siddiqui, Muhammad Abdullah Shadab and Mia, Md Palas and Hossain, Md Abdul Kabir and Rabbi, Md. Sanaul and Butt, Haider and Alam, Fahad},
title = {Recent Advances in Crystalline Architecture and Defect Engineering of 3D‐Printed Metals for Biomedical Breakthroughs: A Comprehensive Review},
journal = {Advanced Engineering Materials},
year = {2025},
volume = {27},
number = {16},
doi = {10.1002/adem.202500257}
}
EUVIMED