EUVIMEDEUVIMED entdecken
Crossref

Microstructure and Wear Properties of Friction Stir Processed AZ31 Magnesium Matrix Composites Reinforced with FeCoCrNiMn High Entropy Alloy Particles

Jilin Xie, Suiping Sun, Yuhua Chen, Yan Wang, Min Zheng, Jiaming Ni, Jiajia Shen, Joao Pedro Oliveira

Advanced Engineering Materials · 2025-08 · 27 (15)

DOI: 10.1002/adem.202403039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, 2025-07. Verfasst von Jilin Xie und 7 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 39 Literaturangaben. Gefördert von: Fundação para a Ciência e a Tecnologia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metal matrix composites, combining AZ31 magnesium alloy and FeCoCrNiMn high entropy alloy (HEA), were fabricated by multipass friction stir processing (FSP). The effect of the HEA particles on the matrix grain size, the distribution morphology of HEA particles, the interface between matrix and reinforcement phases, and the effect of adding HEA particles on the mechanical and wear properties of the fabricated material were systematically investigated. The clustering of HEA particles occurred in the magnesium matrix, and the addition of HEA particles enhances the effect of recrystallization during the FSP process and effectively refines the grain size. The HEA reinforcement is found to have good interfacial bonding with the matrix, with no defects. Evidence of short‐range diffusion is observed, attributed to the thermal cycles associated with the FSP processing. After undergoing five processing passes, the fabricated composite material achieved a tensile strength of 255.46 MPa and maintained an excellent elongation of 16.57%. The composite material exhibits optimal wear resistance, with the average coefficient of friction reduced from the original base material's 0.239 to 0.188 in the optimized processed area. Moreover, the wear mechanism changed from adhesive wear of the base metal to abrasive wear in the processed material.

Förderung

  • Fundação para a Ciência e a Tecnologia

Zitieren

APA

Xie, J., Sun, S., Chen, Y., Wang, Y., Zheng, M., Ni, J., Shen, J., & Oliveira, J. P. (2025). Microstructure and Wear Properties of Friction Stir Processed AZ31 Magnesium Matrix Composites Reinforced with FeCoCrNiMn High Entropy Alloy Particles. Advanced Engineering Materials, 27(15). https://doi.org/10.1002/adem.202403039

Vancouver

Xie J, Sun S, Chen Y, Wang Y, Zheng M, Ni J, et al. Microstructure and Wear Properties of Friction Stir Processed AZ31 Magnesium Matrix Composites Reinforced with FeCoCrNiMn High Entropy Alloy Particles. Advanced Engineering Materials. 2025;27(15). doi:10.1002/adem.202403039

BibTeX
@article{Xie2025,
  author = {Xie, Jilin and Sun, Suiping and Chen, Yuhua and Wang, Yan and Zheng, Min and Ni, Jiaming and Shen, Jiajia and Oliveira, Joao Pedro},
  title = {Microstructure and Wear Properties of Friction Stir Processed AZ31 Magnesium Matrix Composites Reinforced with FeCoCrNiMn High Entropy Alloy Particles},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {15},
  doi = {10.1002/adem.202403039}
}
Kostenlos starten →