Glycerol‐Assisted Modification of 3D‐Printed Zeolite (3D‐Ze/Gy) for Enhanced Methylene Blue Dye Removal in Aqueous Solutions
Advanced Engineering Materials · 2025-05 · 27 (9)
DOI: 10.1002/adem.202402555 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 19.02.2025. Verfasst von Fauzi Ikhsan und 9 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 79 Literaturangaben. Gefördert von: Direktorat Riset dan Pengabdian Masyarakat.
Abstract (Originalsprache)
Natural zeolite faces challenges in wastewater treatment due to poor mechanical stability, handling difficulties, and limited reusability. To address these limitations, structured zeolite is fabricated using 3D printing, with glycerol as a porogenic agent to enhance porosity and adsorption capacity. Scanning electron microscope–energy dispersive X‐ray spectroscopy confirms successful fabrication and improves pore formation, while thermogravimetric/differential thermal analysis demonstrates stable thermal properties. The pHpzc values are 7.43 (3D‐Ze/Gy50) and 7.52 (3D‐Ze/Gy0), indicating minor surface charge changes after glycerol incorporation. Adsorption follows a pseudo‐second‐order kinetic model (chemisorption) and aligned with the Langmuir isotherm, confirming monolayer adsorption on a homogeneous surface. Thermodynamic analysis reveals that the adsorption process is endothermic and nonspontaneous at lower temperatures but becomes favorable at higher temperatures. The 3D‐Ze/Gy50 sample exhibits superior adsorption capacities of 1.35 mg g −1 at 15 mg L −1 and 2.04 mg g −1 at 25 mg L −1 Methylene blue concentrations outperform unmodified samples. Reusability tests show consistent performance over six cycles, with regeneration achieved via resintering at 600 °C for 2 h. These results validate the potential of 3D‐printed glycerol‐modified zeolite as a reusable, high‐performance adsorbent for wastewater treatment, offering an innovative approach for developing sustainable materials for environmental remediation.
Förderung
- Direktorat Riset dan Pengabdian Masyarakat
Zitieren
APA
Ikhsan, F., Muhtar, S. A., Aflaha, R., Adhika, D. R., Muhyi, A., Triyana, K., Khairurrijal, K., Taher, T., Rianjanu, A., & Arif, M. F. (2025). Glycerol‐Assisted Modification of 3D‐Printed Zeolite (3D‐Ze/Gy) for Enhanced Methylene Blue Dye Removal in Aqueous Solutions. Advanced Engineering Materials, 27(9). https://doi.org/10.1002/adem.202402555
Vancouver
Ikhsan F, Muhtar SA, Aflaha R, Adhika DR, Muhyi A, Triyana K, et al. Glycerol‐Assisted Modification of 3D‐Printed Zeolite (3D‐Ze/Gy) for Enhanced Methylene Blue Dye Removal in Aqueous Solutions. Advanced Engineering Materials. 2025;27(9). doi:10.1002/adem.202402555
BibTeX
@article{Ikhsan2025,
author = {Ikhsan, Fauzi and Muhtar, Sephia Amanda and Aflaha, Rizky and Adhika, Damar Rastri and Muhyi, Abdul and Triyana, Kuwat and Khairurrijal, Khairurrijal and Taher, Tarmizi and Rianjanu, Aditya and Arif, Muhamad F.},
title = {Glycerol‐Assisted Modification of 3D‐Printed Zeolite (3D‐Ze/Gy) for Enhanced Methylene Blue Dye Removal in Aqueous Solutions},
journal = {Advanced Engineering Materials},
year = {2025},
volume = {27},
number = {9},
doi = {10.1002/adem.202402555}
}
EUVIMED