Manufacturability and Compression Performance of Ti 6 Al 4 V Alloy with Triply Periodic Minimal Surface Structures Fabricated by Selective Laser Melting
Advanced Engineering Materials · 2025-06 · 27 (12)
DOI: 10.1002/adem.202402430 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 28.04.2025. Verfasst von Weijun Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 45 Literaturangaben.
Abstract (Originalsprache)
Triply periodic minimal surface (TPMS) structures possess excellent mechanical performance, superior morphological bionics feature, which are considered as the most promising porous structure for bone implants. In this article, the manufacturability and compression performance of the Ti 6 Al 4 V alloy with four TPMS structures (Sheet Gyroid, Sheet Diamond, Network Gyroid and Network Diamond) fabricated by selective laser melting (SLM) technology are experimentally carried out, and the corresponding mechanisms are revealed. The results show that the manufacturing deviation of the four TPMS structures show significantly different, which is related to the adhered powder and overhanging phenomena, and an evident anisotropy in surface morphology is observed. The correlations of elastic modulus and yield strength with relative density are established for SLM Ti 6 Al 4 V alloy with the four TPMS structures, respectively. Among them, the Sheet Diamond structure shows the best compression performance. The fracture morphology analysis indicates that the TPMS structures exhibit a mixed brittle–plastic fracture mode, and more dimples are observed in Sheet structures which are prone to collective collapsing mechanism. This study provides theoretical guidance for the design of SLM Ti 6 Al 4 V alloy with TPMS structures.
Zitieren
APA
Liu, W., Gao, Z., Wang, H., Li, W., Bian, H., & Zhang, K. (2025). Manufacturability and Compression Performance of Ti 6 Al 4 V Alloy with Triply Periodic Minimal Surface Structures Fabricated by Selective Laser Melting. Advanced Engineering Materials, 27(12). https://doi.org/10.1002/adem.202402430
Vancouver
Liu W, Gao Z, Wang H, Li W, Bian H, Zhang K. Manufacturability and Compression Performance of Ti 6 Al 4 V Alloy with Triply Periodic Minimal Surface Structures Fabricated by Selective Laser Melting. Advanced Engineering Materials. 2025;27(12). doi:10.1002/adem.202402430
BibTeX
@article{Liu2025,
author = {Liu, Weijun and Gao, Zhilin and Wang, Huiru and Li, Wanqiu and Bian, Hongyou and Zhang, Kai},
title = {Manufacturability and Compression Performance of Ti 6 Al 4 V Alloy with Triply Periodic Minimal Surface Structures Fabricated by Selective Laser Melting},
journal = {Advanced Engineering Materials},
year = {2025},
volume = {27},
number = {12},
doi = {10.1002/adem.202402430}
}
EUVIMED