EUVIMEDEUVIMED entdecken
Crossref

Direct Ink Writing (3D Printing) of Robust, Highly Efficient, Double‐Half‐Heusler Thermoelectric High‐Entropy Alloy

Bifa Shimelis Haile, Varinder Pal, Tapas Pal, Surbhi Slathia, Gemechis Megersa Jigi, Solomon Demiss Negedu, Nishant Tiwari, Himanshu Singh, Antony Joseph, Femi Emmanuel Olu, Chandra Sekhar Tiwary

Advanced Engineering Materials · 2025-04 · 27 (7)

DOI: 10.1002/adem.202402283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 28.02.2025. Verfasst von Bifa Shimelis Haile und 10 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 56 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In thermoelectric (TE) devices, geometry of the TE‐leg has a significant impact on its energy conversion efficiency. TE leg fabrication still relies on traditional methods with regular solid shapes which limits the conversion efficiency. In the present work, different geometries (solid, mesh, hollow, and honeycomb) based on a double‐half‐Heusler (hH) (Ti 1.75 Zr 0.25 Ni 1.5 Fe 0.5 SnSb) high‐entropy alloy are 3D printed using direct ink writing technique. Through the rheological properties, good shear‐thinning characteristics and excellent printability are shown. X‐ray diffraction of the as‐cast and sintered 3D‐printed structures confirms the formation of dominant hH phase. Using infrared imaging, it is revealed that the heat distribution in these structures decreases as an order of as‐cast, solid, mesh, hollow, and honeycomb geometries due to improved surface area to volume ratio respectively. Using X‐ray micro‐computed tomography, the total porosity of the 3D‐printed sample is shown to be around 24.89%. Honeycomb‐shaped structure shows highest temperature gradient (from top to bottom region of sample) of 174 °C as compared to as cast (60.1 °C), which is further validated using finite‐element analysis. In addition, specific energy absorption of 3D‐printed structure is enhanced by 18.5% compared to that of as‐cast structure.

Zitieren

APA

Haile, B. S., Pal, V., Pal, T., Slathia, S., Jigi, G. M., Negedu, S. D., Tiwari, N., Singh, H., Joseph, A., Olu, F. E., & Tiwary, C. S. (2025). Direct Ink Writing (3D Printing) of Robust, Highly Efficient, Double‐Half‐Heusler Thermoelectric High‐Entropy Alloy. Advanced Engineering Materials, 27(7). https://doi.org/10.1002/adem.202402283

Vancouver

Haile BS, Pal V, Pal T, Slathia S, Jigi GM, Negedu SD, et al. Direct Ink Writing (3D Printing) of Robust, Highly Efficient, Double‐Half‐Heusler Thermoelectric High‐Entropy Alloy. Advanced Engineering Materials. 2025;27(7). doi:10.1002/adem.202402283

BibTeX
@article{Haile2025,
  author = {Haile, Bifa Shimelis and Pal, Varinder and Pal, Tapas and Slathia, Surbhi and Jigi, Gemechis Megersa and Negedu, Solomon Demiss and Tiwari, Nishant and Singh, Himanshu and Joseph, Antony and Olu, Femi Emmanuel and Tiwary, Chandra Sekhar},
  title = {Direct Ink Writing (3D Printing) of Robust, Highly Efficient, Double‐Half‐Heusler Thermoelectric High‐Entropy Alloy},
  journal = {Advanced Engineering Materials},
  year = {2025},
  volume = {27},
  number = {7},
  doi = {10.1002/adem.202402283}
}
Kostenlos starten →