EUVIMEDEUVIMED entdecken
Crossref

Energy Dissipation during Crack Growth in Rubbers with Mullins Softening

Saleh Alzughaibi, Julien Caillard, Davide Colombo, Rong Long

Advanced Engineering Materials · 06.05.2026 · 28 (9)

DOI: 10.1002/adem.202402173 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 13.01.2025. Verfasst von Saleh Alzughaibi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: Michelin, National Science Foundation, Qassim University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The modulus and toughness of rubbers can be improved by incorporating fillers into the rubber matrix. Filled rubbers exhibit a strain‐induced softening phenomenon known as the Mullins effect. Upon deformation, filled rubbers can dissipate strain energy, which results in enhanced resistance to crack growth. An in‐depth understanding of the energy dissipation accompanying crack growth is important for the predictive modeling of rubber fracture. Herein, an experimental study on the fracture toughness of filled and unfilled rubbers with a focus on characterizing the energy dissipation caused by the Mullins effect during crack growth is presented. A particle tracking method is used to measure the nonlinear deformation fields in notched rubber specimens when subjected to monotonic tensile loading. Using the measured deformation fields and an independently calibrated constitutive model, the evolution of stress fields during crack growth is quantitatively evaluated, based on which the energy dissipation and intrinsic toughness are determined with the assumption of steady‐state crack growth. It is found that the filled rubber exhibits more energy dissipation during crack growth than the unfilled rubber. More importantly, the intrinsic toughness of the filled rubber (5000–8000 J m − 2 ) is also much higher than that of the unfilled rubber (150–300 J m −2 ).

Förderung

  • Michelin
  • National Science Foundation
  • Qassim University

Zitieren

APA

Alzughaibi, S., Caillard, J., Colombo, D., & Long, R. (2026). Energy Dissipation during Crack Growth in Rubbers with Mullins Softening. Advanced Engineering Materials, 28(9). https://doi.org/10.1002/adem.202402173

Vancouver

Alzughaibi S, Caillard J, Colombo D, Long R. Energy Dissipation during Crack Growth in Rubbers with Mullins Softening. Advanced Engineering Materials. 2026;28(9). doi:10.1002/adem.202402173

BibTeX
@article{Alzughaibi2026,
  author = {Alzughaibi, Saleh and Caillard, Julien and Colombo, Davide and Long, Rong},
  title = {Energy Dissipation during Crack Growth in Rubbers with Mullins Softening},
  journal = {Advanced Engineering Materials},
  year = {2026},
  volume = {28},
  number = {9},
  doi = {10.1002/adem.202402173}
}
Kostenlos starten →