Manufacturing of Continuous Core–Shell Hydrated Salt Fibers for Room Temperature Thermal Energy Storage
Advanced Engineering Materials · 2024-12 · 26 (24)
DOI: 10.1002/adem.202400012 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 17.07.2024. Verfasst von Michael D. Toomey und 7 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 87 Literaturangaben. Gefördert von: Building Technologies Office.
Abstract (Originalsprache)
The encapsulation of salt hydrate phase change materials (PCMs) in uniform microscale bodies has yet been reported in research due in part to the delicate relationship between thermal performance and water‐to‐salt ratios which are easily altered during manufacturing. Herein, core–shell composite fibers comprised of a salt hydrate PCM core and a poly(acrylonitrile) (PAN) shell are wet spun in a continuous process using a syringe pump and coaxial die. The PCM phase comprises calcium chloride hexahydrate (CaCl 2 ·6H 2 O) with strontium chloride hexahydrate (SrCl 2 ·6H 2 O) (3 wt%) and fumed silica (SiO 2 ) (2 wt%) as additive, acomposition that is prepared from homogenous melt at 40 °C. 15 wt% PAN in dimethylsulfoxide solvent is used to prepare the shell‐forming polymer gel. PCM and polymer gel injection rates of 10–40 mL h −1 are used tospin coaxial fibers through a coagulation bath, yielding continuous microtubules with diameters in the range of 850–1500 μm. Cyclic testing shows that after 1000 cycles, melting enthalpies incurred only a 3.5% decline from 131.46 to 126.9 J g −1 . Success here overcomes several coincidental drawbacks of PCM fiber performance and manufacturing and delivers the first example of scalable roll‐to‐roll PCM fiber produced by wet spinning for building material applications.
Förderung
- Building Technologies Office
Zitieren
APA
Toomey, M. D., Kanbargi, N., Kearney, L. T., Hinton, H., Gupta, S., Sawafta, R., Naskar, A. K., & Sharma, J. (2024). Manufacturing of Continuous Core–Shell Hydrated Salt Fibers for Room Temperature Thermal Energy Storage. Advanced Engineering Materials, 26(24). https://doi.org/10.1002/adem.202400012
Vancouver
Toomey MD, Kanbargi N, Kearney LT, Hinton H, Gupta S, Sawafta R, et al. Manufacturing of Continuous Core–Shell Hydrated Salt Fibers for Room Temperature Thermal Energy Storage. Advanced Engineering Materials. 2024;26(24). doi:10.1002/adem.202400012
BibTeX
@article{Toomey2024,
author = {Toomey, Michael D. and Kanbargi, Nihal and Kearney, Logan T. and Hinton, Holly and Gupta, Sumit and Sawafta, Reyad and Naskar, Amit K. and Sharma, Jaswinder},
title = {Manufacturing of Continuous Core–Shell Hydrated Salt Fibers for Room Temperature Thermal Energy Storage},
journal = {Advanced Engineering Materials},
year = {2024},
volume = {26},
number = {24},
doi = {10.1002/adem.202400012}
}
EUVIMED