EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Characterization of BaZrS 3 Thin Films via Stacked Layer Methodology: A Comparative Study of BaZrS 3 on Zirconium Foil and Silicon Carbide Substrates

Sumbal Jamshaid, Maria Rita Cicconi, Wolfgang Heiss, Kyle G. Webber, Peter J. Wellmann

Advanced Engineering Materials · 2024-09 · 26 (18)

DOI: 10.1002/adem.202302161 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 04.04.2024. Verfasst von Sumbal Jamshaid und 4 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chalcogenide perovskites are an emerging class of semiconductors particularly interesting for optoelectronic applications due to their high absorption coefficients and direct bandgaps of 1.7–1.9 eV. However, few processing routes have been developed for the synthesis of BaZrS 3 thin films. The advances in the fabrication of BaZrS 3 thin films using zirconium foil as precursor and substrate is a new strategy, which is compared with the results of BaZrS 3 thin films deposited on silicon carbide (SiC) substrate. In this study, a stacked layer methodology, inspired by the fabrication methods used for chalcopyrites and kesterites, is employed. The main objective is to facilitate the conversion of these layers into the desired perovskite structure through annealing. In methodology, we initiated the process by depositing elemental Zr by sputtering on SiC, followed by BaS on top of the Zr through electron beam evaporation and then sulphurized and annealed at high temperature (≈1000–1050 °C) to form BaZrS 3 in an inductively heated physical vapour transport setup in the presence of elemental sulphur. In the parallel approach the methodology remains same, with the sole deviation of zirconium foil, which act as both the substrate and the source. The successful synthesis of BaZrS 3 is confirmed by X‐Ray diffraction (XRD), scanning electron microscopy (SEM), and energy‐dispersive X‐Ray spectroscopy (EDS), while the optical band gap is analyzed by UV‐Vis. The microstructure of the BaZrS 3 films shows the polycrystalline structure and surface roughness.

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Jamshaid, S., Cicconi, M. R., Heiss, W., Webber, K. G., & Wellmann, P. J. (2024). Synthesis and Characterization of BaZrS 3 Thin Films via Stacked Layer Methodology: A Comparative Study of BaZrS 3 on Zirconium Foil and Silicon Carbide Substrates. Advanced Engineering Materials, 26(18). https://doi.org/10.1002/adem.202302161

Vancouver

Jamshaid S, Cicconi MR, Heiss W, Webber KG, Wellmann PJ. Synthesis and Characterization of BaZrS 3 Thin Films via Stacked Layer Methodology: A Comparative Study of BaZrS 3 on Zirconium Foil and Silicon Carbide Substrates. Advanced Engineering Materials. 2024;26(18). doi:10.1002/adem.202302161

BibTeX
@article{Jamshaid2024,
  author = {Jamshaid, Sumbal and Cicconi, Maria Rita and Heiss, Wolfgang and Webber, Kyle G. and Wellmann, Peter J.},
  title = {Synthesis and Characterization of BaZrS 3 Thin Films via Stacked Layer Methodology: A Comparative Study of BaZrS 3 on Zirconium Foil and Silicon Carbide Substrates},
  journal = {Advanced Engineering Materials},
  year = {2024},
  volume = {26},
  number = {18},
  doi = {10.1002/adem.202302161}
}
Kostenlos starten →