EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature

Nadja Sonntag, Benjamin Piesker, Luis Alexander Ávila Calderón, Gunther Mohr, Birgit Rehmer, Leonardo Agudo Jácome, Kai Hilgenberg, Alexander Evans, Birgit Skrotzki

Advanced Engineering Materials · 2024-05 · 26 (10)

DOI: 10.1002/adem.202302122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 17.04.2024. Verfasst von Nadja Sonntag und 8 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.

Zitieren

APA

Sonntag, N., Piesker, B., Calderón, L. A. Á., Mohr, G., Rehmer, B., Jácome, L. A., Hilgenberg, K., Evans, A., & Skrotzki, B. (2024). Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature. Advanced Engineering Materials, 26(10). https://doi.org/10.1002/adem.202302122

Vancouver

Sonntag N, Piesker B, Calderón LAÁ, Mohr G, Rehmer B, Jácome LA, et al. Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature. Advanced Engineering Materials. 2024;26(10). doi:10.1002/adem.202302122

BibTeX
@article{Sonntag2024,
  author = {Sonntag, Nadja and Piesker, Benjamin and Calderón, Luis Alexander Ávila and Mohr, Gunther and Rehmer, Birgit and Jácome, Leonardo Agudo and Hilgenberg, Kai and Evans, Alexander and Skrotzki, Birgit},
  title = {Tensile and Low‐Cycle Fatigue Behavior of Laser Powder Bed Fused Inconel 718 at Room and High Temperature},
  journal = {Advanced Engineering Materials},
  year = {2024},
  volume = {26},
  number = {10},
  doi = {10.1002/adem.202302122}
}
Kostenlos starten →