EUVIMEDEUVIMED entdecken
Crossref

The Influence of Heat Treatment on Microstructure and Properties of Selective Laser Melting CuCrZr Alloy

Qingjuan Wang, Jiale Song, Wen Wang, Yufeng Zhang, Kuaishe Wang, Zhongze Du

Advanced Engineering Materials · 2024-03 · 26 (6)

DOI: 10.1002/adem.202301680 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 29.01.2024. Verfasst von Qingjuan Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effects of different heat treatment processes on the properties of selective laser melting (SLM) CuCrZr alloy are investigated toenhance its overall performance. Solution treatment (ST) results in recrystallized grains, leading to an increase in electrical conductivity to 45.36% IACS and a decrease in tensile strength to 221.8 MPa compared to SLM CuCrZr alloys. Solution aging treatment (SAT) further improves the conductivity to 83.12% IACS and the tensile strength to 335.6 MPa. The optimal combination of electrical conductivity (72.82% IACS) and tensile strength (611.3 MPa) is achieved through direct aging treatment (DAH) at 480 °C for 2 h. With increasing aging temperature and time, the electrical conductivity initially increases rapidly and then plateaues, while the tensile strength exhibits an initial increase followed by a decrease. The proportion of precipitated phase gradually increases with longer aging time. Coherent precipitation occurs between the phase and the matrix at 480 °C for 120 min, while at 480 °C for 360 min, both face‐centered cubic and body‐centered cubic precipitates coexist with an incoherent relationship with the matrix. Overall, DAH proves effective in enhancing the properties of SLM CuCrZr alloy, with precipitation strengthening serving as the primary mechanism for improving its performance.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, Q., Song, J., Wang, W., Zhang, Y., Wang, K., & Du, Z. (2024). The Influence of Heat Treatment on Microstructure and Properties of Selective Laser Melting CuCrZr Alloy. Advanced Engineering Materials, 26(6). https://doi.org/10.1002/adem.202301680

Vancouver

Wang Q, Song J, Wang W, Zhang Y, Wang K, Du Z. The Influence of Heat Treatment on Microstructure and Properties of Selective Laser Melting CuCrZr Alloy. Advanced Engineering Materials. 2024;26(6). doi:10.1002/adem.202301680

BibTeX
@article{Wang2024,
  author = {Wang, Qingjuan and Song, Jiale and Wang, Wen and Zhang, Yufeng and Wang, Kuaishe and Du, Zhongze},
  title = {The Influence of Heat Treatment on Microstructure and Properties of Selective Laser Melting CuCrZr Alloy},
  journal = {Advanced Engineering Materials},
  year = {2024},
  volume = {26},
  number = {6},
  doi = {10.1002/adem.202301680}
}
Kostenlos starten →