EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the Post‐Processing of Complex Additive Manufactured Metallic Parts: A Review

Shamim Pourrahimi, Lucas A. Hof

Advanced Engineering Materials · 2024-05 · 26 (10)

DOI: 10.1002/adem.202301511 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 21.04.2024. Verfasst von Shamim Pourrahimi und 1 weiteren Autor:innen. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 92 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) is gaining more attention due to its capability to produce customized and complex geometries. However, one significant drawback of AM is the rough surface finish of the as‐built parts, necessitating post‐processing for achieving the desired surface quality that meets application requirements. Post‐processing of complex geometries, such as parts with internal holes, lattice structures, and free‐form surfaces, poses unique challenges compared to other components. This review classifies various post‐processing methods employed for complex AM parts, presenting the experimental conditions for each treatment alongside the resulting improvement in surface roughness as a success criterion. The post‐processing methods are categorized into four groups: electrochemical polishing (ECP), chemical polishing (CP), mechanical polishing, and hybrid methods. Notably, mechanical methods exhibit the highest roughness improvement at 69.9%, followed by ECP (59.9%), hybrid methods (47.4%), and CP (49.5%). Nevertheless, mechanical post‐processing techniques are less frequently utilized for lattice parts, making chemical or electrochemical methods more promising alternatives. In summary, all four categories of post‐processing methods can improve the internal surfaces quality of AM holes. While mechanical methods offer the most substantial roughness improvement overall, chemical and electrochemical methods show particular potential for addressing the challenges associated with complex geometries.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Pourrahimi, S., & Hof, L. A. (2024). On the Post‐Processing of Complex Additive Manufactured Metallic Parts: A Review. Advanced Engineering Materials, 26(10). https://doi.org/10.1002/adem.202301511

Vancouver

Pourrahimi S, Hof LA. On the Post‐Processing of Complex Additive Manufactured Metallic Parts: A Review. Advanced Engineering Materials. 2024;26(10). doi:10.1002/adem.202301511

BibTeX
@article{Pourrahimi2024,
  author = {Pourrahimi, Shamim and Hof, Lucas A.},
  title = {On the Post‐Processing of Complex Additive Manufactured Metallic Parts: A Review},
  journal = {Advanced Engineering Materials},
  year = {2024},
  volume = {26},
  number = {10},
  doi = {10.1002/adem.202301511}
}
Kostenlos starten →