EUVIMEDEUVIMED entdecken
Crossref

Effect of Hot Deformation on Microstructure and Porosity of Additively Manufactured 7050 Al Alloy

Heng Su, Bin Shao, Jiabin Liu, Yingying Zong, Debin Shan

Advanced Engineering Materials · 2024-02 · 26 (3)

DOI: 10.1002/adem.202301124 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 08.01.2024. Verfasst von Heng Su und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 27 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wire arc additive manufacturing technology of 7050 aluminum alloy has a broad application prospect in aerospace field. But the lack of comprehensive properties caused by coarse columnar grains and pores becomes an important bottleneck. In this study, hot compression is conducted to simulate forging process to investigate the microstructure improvement of as‐deposited 7050 Al alloy by plastic deformation. The effect of temperature at 390–540 °C and deformation at 20%–60% on the microstructure and porosity is revealed. In the results, only slip deformation occurs at 420 °C and below. Local dynamic recrystallization occurs at columnar grain boundaries at 450 °C. Complete dynamic recrystallization occurs at 480 °C with the average grain size of about 60 μm. The microstructure overburns at 510 °C and above. The η eutectic phases are broken during deformation. The hot deformation accelerates the dissolution of η eutectic phases and the dissolution temperature of nano‐phases is 30 °C lower than solid solution. As the deformation amount increases from 20% to 60%, the deformation gradually extends from interlayer to inner of columnar grain layers. The spherical pores are first compressed to ellipsoid and then further compressed until completely closed. The pores are basically annihilated completely at 60% deformation with porosity of less than 0.1%.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Su, H., Shao, B., Liu, J., Zong, Y., & Shan, D. (2024). Effect of Hot Deformation on Microstructure and Porosity of Additively Manufactured 7050 Al Alloy. Advanced Engineering Materials, 26(3). https://doi.org/10.1002/adem.202301124

Vancouver

Su H, Shao B, Liu J, Zong Y, Shan D. Effect of Hot Deformation on Microstructure and Porosity of Additively Manufactured 7050 Al Alloy. Advanced Engineering Materials. 2024;26(3). doi:10.1002/adem.202301124

BibTeX
@article{Su2024,
  author = {Su, Heng and Shao, Bin and Liu, Jiabin and Zong, Yingying and Shan, Debin},
  title = {Effect of Hot Deformation on Microstructure and Porosity of Additively Manufactured 7050 Al Alloy},
  journal = {Advanced Engineering Materials},
  year = {2024},
  volume = {26},
  number = {3},
  doi = {10.1002/adem.202301124}
}
Kostenlos starten →