Additive Manufacturing of Flexible Strain Sensors Based on Smart Composites for Structural Health Monitoring with High Accuracy and Fidelity
Advanced Engineering Materials · 2023-11 · 25 (22)
DOI: 10.1002/adem.202300763 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 03.10.2023. Verfasst von Sheraz Ahmed und 3 weiteren Autor:innen. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This research introduces a novel flexible spherical carbon nanoparticle‐based polyurethane conductive ink, which is employed to fabricate strain sensors by a lab‐developed direct ink writing/3D printing system. Rheological tests are performed, and sensors are pasted on glass fiber‐reinforced plastic specimens to study strain gauge behaviors under quasistatic loading. The gauge factor in tensile loading is found to be layer width dependent as decreasing the strain gauge's layer width increases the sensitivity of the strain sensor. A maximum gauge factor of 34 is achieved using a layer width of 0.2 mm, 17 times greater than commercially available metal foil strain gauges. The four‐point bend tests are performed under tension/compression to assess the sensor's strain‐sensing and damage‐monitoring ability. Fractographic analysis is coupled with strain monitoring using the developed sensor, which confirms that the failure progresses from intralaminar failure modes such as ply splitting in tension. At the same time, delamination leads to kink band formation under compression and the eventual failure of load‐bearing fibers. The developed sensor exhibits repeatable performance with low hysteresis and integrated nonlinearity errors for up to 1000 cycles. The developed sensors could be effectively employed for online in situ structural health monitoring of aerospace structures under static and dynamic loading.
Zitieren
APA
Ahmed, S., Bodaghi, M., Nauman, S., & Khan, Z. M. (2023). Additive Manufacturing of Flexible Strain Sensors Based on Smart Composites for Structural Health Monitoring with High Accuracy and Fidelity. Advanced Engineering Materials, 25(22). https://doi.org/10.1002/adem.202300763
Vancouver
Ahmed S, Bodaghi M, Nauman S, Khan ZM. Additive Manufacturing of Flexible Strain Sensors Based on Smart Composites for Structural Health Monitoring with High Accuracy and Fidelity. Advanced Engineering Materials. 2023;25(22). doi:10.1002/adem.202300763
BibTeX
@article{Ahmed2023,
author = {Ahmed, Sheraz and Bodaghi, Mahdi and Nauman, Saad and Khan, Zaffar Muhammad},
title = {Additive Manufacturing of Flexible Strain Sensors Based on Smart Composites for Structural Health Monitoring with High Accuracy and Fidelity},
journal = {Advanced Engineering Materials},
year = {2023},
volume = {25},
number = {22},
doi = {10.1002/adem.202300763}
}
EUVIMED