EUVIMEDEUVIMED entdecken
Crossref

Three‐Point Bending Behavior of Foam‐Filled Conventional and Auxetic 3D‐Printed Honeycombs

Amin Montazeri, Ehsan Bahmanpour, Majid Safarabadi

Advanced Engineering Materials · 2023-09 · 25 (17)

DOI: 10.1002/adem.202300273 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 21.06.2023. Verfasst von Amin Montazeri und 2 weiteren Autor:innen. Die Arbeit wurde bisher 68-mal zitiert (Crossref) und nennt 41 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cellular hexagonal (conventional) and re‐entrant (auxetic) honeycombs are applicable in automotive, construction, and protective engineering. Auxetic structures own excellent energy absorption and flexural behavior due to their special deformation under loading. This work explores the performance of additively manufactured polylactic acid (PLA)‐ and thermoplastic polyurethane (TPU)‐based hexagonal and re‐entrant honeycombs under flexural loading via experimental three‐point bending (TPB) tests and finite‐element analysis (FEA). 3D‐printed conventional and auxetic cellular structures are filled with polyurethane (PU) foam and their energy absorption capacity and flexural modulus are compared with hollow structures. The results reveal that TPU‐based structures’ energy absorption capacity and flexural modulus improve significantly, whereas the PLA‐based structures’ performance deteriorates when filled with PU foam. Moreover, re‐entrant honeycombs are better reinforced with foam in comparison to the hexagonal honeycombs, as the re‐entrant's unit cell is more spacious than the hexagonal unit cell. Finally, parametric studies are performed via FEA to investigate the influence of geometric parameters of structures and flexural loading setup on the performance of the honeycombs, showing that structures with thicker struts and higher cell angle can act stiffer under TPB. The outcomes of this research indicate the promising performance of foam‐filled TPU‐based auxetic structures.

Zitieren

APA

Montazeri, A., Bahmanpour, E., & Safarabadi, M. (2023). Three‐Point Bending Behavior of Foam‐Filled Conventional and Auxetic 3D‐Printed Honeycombs. Advanced Engineering Materials, 25(17). https://doi.org/10.1002/adem.202300273

Vancouver

Montazeri A, Bahmanpour E, Safarabadi M. Three‐Point Bending Behavior of Foam‐Filled Conventional and Auxetic 3D‐Printed Honeycombs. Advanced Engineering Materials. 2023;25(17). doi:10.1002/adem.202300273

BibTeX
@article{Montazeri2023,
  author = {Montazeri, Amin and Bahmanpour, Ehsan and Safarabadi, Majid},
  title = {Three‐Point Bending Behavior of Foam‐Filled Conventional and Auxetic 3D‐Printed Honeycombs},
  journal = {Advanced Engineering Materials},
  year = {2023},
  volume = {25},
  number = {17},
  doi = {10.1002/adem.202300273}
}
Kostenlos starten →