Effect of Vacuum Heat Treatment on the Microstructure and Tribological Property of Ti–6Al–4V Alloy with Cu Coating
Advanced Engineering Materials · 2023-08 · 25 (16)
DOI: 10.1002/adem.202300246 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 16.06.2023. Verfasst von Cheng Gu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Graduate Scientific Research and Innovation Foundation of Chongqing.
Abstract (Originalsprache)
The effect of vacuum heat treatment on the interface microstructure and tribological property of Cu‐coated Ti – 6Al – 4V alloy is investigated herein. After the vacuum heat treatment process, a diffusion layer is formed at the interface between the Cu coating and the Ti – 6Al – 4V substrate. The formed intermetallic compounds at the interface between the Ti – 6Al – 4V substrate and Cu coating are CuTi 2 , CuTi, Cu 4 Ti 3 , and β‐Cu 4 Ti. The activation energy of intermetallic compound growth in the diffusion zone of Cu‐coated Ti – 6Al – 4V is 126.0 kJ mol −1 , and the pre‐exponential factor is 0.1 m 2 s −1 . The tribological properties of the Cu‐coated Ti – 6Al – 4V alloy are best when subjected to diffusion treatment at 700 °C for 300 min, with weight loss reduced by 58.2% compared to the Ti – 6Al – 4V alloy. The wear resistance of the Ti – 6Al – 4V alloy can be enhanced by Cu coating and vacuum diffusion heat treatment, and the formation of the Cu – Ti intermetallic compound contributes to this improvement. These findings offer new insights for further advancements in the tribological properties of titanium alloys.
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- Graduate Scientific Research and Innovation Foundation of Chongqing
Zitieren
APA
Gu, C., Wu, Y., Tian, Z., Zhao, J., Wang, Y., & Yuan, M. (2023). Effect of Vacuum Heat Treatment on the Microstructure and Tribological Property of Ti–6Al–4V Alloy with Cu Coating. Advanced Engineering Materials, 25(16). https://doi.org/10.1002/adem.202300246
Vancouver
Gu C, Wu Y, Tian Z, Zhao J, Wang Y, Yuan M. Effect of Vacuum Heat Treatment on the Microstructure and Tribological Property of Ti–6Al–4V Alloy with Cu Coating. Advanced Engineering Materials. 2023;25(16). doi:10.1002/adem.202300246
BibTeX
@article{Gu2023,
author = {Gu, Cheng and Wu, Yuanbing and Tian, Zenghui and Zhao, Jianhua and Wang, Yajun and Yuan, Miaowang},
title = {Effect of Vacuum Heat Treatment on the Microstructure and Tribological Property of Ti–6Al–4V Alloy with Cu Coating},
journal = {Advanced Engineering Materials},
year = {2023},
volume = {25},
number = {16},
doi = {10.1002/adem.202300246}
}
EUVIMED