EUVIMEDEUVIMED entdecken
Crossref

Microstructural Characteristics of Ti‐Based Composites with Various Ceramic Reinforcements Manufactured via Hydrogen‐Assisted Blended Elemental Powder Metallurgy

Yuchao Song, Tuo Cheng, Cheng Wang, Oleksandr Stasiuk, Dmytro Savvakin, Orest Ivasishin

Advanced Engineering Materials · 2023-03 · 25 (5)

DOI: 10.1002/adem.202101689 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 21.09.2022. Verfasst von Yuchao Song und 5 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Jilin University, National Academy of Sciences of Ukraine.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The manufacturing of in situ reinforced titanium matrix composites by the sintering of titanium hydride and ceramic powder blends is an attractive and cost‐efficient process. Herein, a novel two‐stage (double‐compaction/double‐sintering) hydrogen‐assisted powder approach is suggested to produce uniform highly dense Ti‐based composites reinforced with TiB, TiC, and dual TiC + TiB phase particles. In this approach, the hydrogenation and milling of presintered products enable the initial porous materials to transform into hydrogenated prealloyed (PA) powders of controlled sizes, and a second press‐and‐sinter process further converts the PA powders into nearly dense composite microstructures with evenly distributed fine reinforcements. The adverse effect of the raw reinforcing powder size on microstructure uniformity, porosity, and mechanical characteristics of the presintered in situ composites becomes negligible in final sintering stage. The reduction of the porosity and enhancement of the hardness indicate that the hydrogen‐assisted double‐compaction and double‐sintering blended elemental powder metallurgy (BEPM) + PA approach enables the low‐cost fabrication of Ti‐based composites with suitable mechanical characteristics.

Förderung

  • Jilin University
  • National Academy of Sciences of Ukraine

Zitieren

APA

Song, Y., Cheng, T., Wang, C., Stasiuk, O., Savvakin, D., & Ivasishin, O. (2023). Microstructural Characteristics of Ti‐Based Composites with Various Ceramic Reinforcements Manufactured via Hydrogen‐Assisted Blended Elemental Powder Metallurgy. Advanced Engineering Materials, 25(5). https://doi.org/10.1002/adem.202101689

Vancouver

Song Y, Cheng T, Wang C, Stasiuk O, Savvakin D, Ivasishin O. Microstructural Characteristics of Ti‐Based Composites with Various Ceramic Reinforcements Manufactured via Hydrogen‐Assisted Blended Elemental Powder Metallurgy. Advanced Engineering Materials. 2023;25(5). doi:10.1002/adem.202101689

BibTeX
@article{Song2023,
  author = {Song, Yuchao and Cheng, Tuo and Wang, Cheng and Stasiuk, Oleksandr and Savvakin, Dmytro and Ivasishin, Orest},
  title = {Microstructural Characteristics of Ti‐Based Composites with Various Ceramic Reinforcements Manufactured via Hydrogen‐Assisted Blended Elemental Powder Metallurgy},
  journal = {Advanced Engineering Materials},
  year = {2023},
  volume = {25},
  number = {5},
  doi = {10.1002/adem.202101689}
}
Kostenlos starten →