EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of software tools and kinetic model selection on myocardial blood flow and flow reserve quantitation in 13 N‐ammonia PET

Naochika Akiya, Kenta Miwa iD, Akira Ando, Noriaki Miyaji, Tensho Yamao, Kaito Wachi, Masaki Masubuchi, Shu Kimura, Reiji Ito, Arata Komatsu, Takuma Horikawa, Kenji Fukushima und 2 weitere

Journal of Applied Clinical Medical Physics · 2026

DOI: 10.1002/acm2.70605 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Clinical Medical Physics, 2026. Verfasst von Naochika Akiya und 13 weiteren Autor:innen. Beteiligte Einrichtung: Department of Radiological Sciences, Graduate School of Health Sciences, Fukushima Medical University, Fukushima-shi, Fukushima, Japan. Hauptthemen laut MEDLINE: Software, Nitrogen Radioisotopes, Ammonia, Image Processing, Computer-Assisted. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fukushima Institute for Research, Education and Innovation (F-REI), KAKENHI Grant-in-Aid for Scientific Research (C), Ministry of Education, Culture, Sports, Science and Technology (MEXT).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Quantitative assessment of myocardial perfusion using 13 N‐ammonia PET with compartmental modeling enables evaluation of myocardial flow reserve (MFR) and prediction of patient prognosis. However, the reliability of these assessments can depend on the analytical methods used for quantitation.

Purpose

The present study aimed to evaluate the variability and agreement of values obtained using three quantitative software tools and to assess the impact of kinetic model selection on myocardial blood flow (MBF) and MFR estimates in a clinical setting.

Methods

We analyzed 100 patients who underwent 13 N‐ammonia PET/CT, including 60 with normal perfusion and 20, 10, and 10 with single‐, two‐, and three‐vessel disease, respectively. We derived MBF and MFR at global (entire left ventricle) and regional (coronary territories) levels and evaluated five analytical pipelines: SyngoMBF, QPET, and three implementations of PMOD tools (1‐tissue compartment, Hutchins, and UCLA models).

Results

MBF and MFR showed high correlations among the software tools, although stress MBF statistically differed between PMOD and QPET. Correlation coefficients between software tools ranged from 0.81 to 0.91 at the global level, and Bland–Altman analysis demonstrated overall agreement with residual variability. In contrast, MBF and MFR values varied depending on the compartment model. The UCLA model yielded the highest stress MBF and MFR, and correlation coefficients between models ranged from 0.43 to 0.99 at the global level. Although Bland–Altman analysis showed overall agreement, noticeable scatter persisted and the UCLA model exhibited a positive bias.

Conclusion

Quantitative MBF and MFR estimates from 13 N‐ammonia PET show good overall agreement across commonly used software tools but remain strongly dependent on kinetic model selection. These findings indicate that quantitative results are not directly interchangeable across different software and modeling approaches, underscoring the importance of methodological consistency when interpreting myocardial perfusion PET in clinical practice.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

SoftwareNitrogen RadioisotopesAmmoniaImage Processing, Computer-AssistedMyocardial Perfusion ImagingPositron Emission Tomography Computed TomographyCoronary CirculationPositron-Emission TomographyFractional Flow Reserve, MyocardialCoronary Artery DiseaseHumansFemaleMaleKineticsMiddle AgedAgedPrognosisRadiopharmaceuticalsRetrospective Studies

Stichwörter der Autor:innen

13N‐ammonia positron emission tomographymyocardial blood flowperfusiontissue compartment model

Substanzen

Nitrogen RadioisotopesAmmoniaNitrogen-13Radiopharmaceuticals

Autor:innen und Institutionen

  • Department of Radiological Sciences, Graduate School of Health Sciences, Fukushima Medical University, Fukushima-shi, Fukushima, Japan.
  • Department of Radiological Sciences, School of Health Sciences, Fukushima Medical University, Fukushima-shi, Fukushima, Japan.
  • Division of Diagnostic Radiology Imaging, Sapporo Kojinkai Memorial Hospital, Sapporo-shi, Hokkaido, Japan.
  • Fukushima Medical University Aizu Medical Center Hospital, Aizuwakamatsu-shi, Fukushima, Japan.
  • Department of Radiology and Nuclear Medicine, Fukushima Medical University, Fukushima-shi, Fukushima, Japan.
  • Department of Radiology, Asahikawa Medical University, Asahikawa, Hokkaido, Japan.

ORCID-Profile: Kenta Miwa

Förderung

  • Fukushima Institute for Research, Education and Innovation (F-REI)
  • KAKENHI Grant-in-Aid for Scientific Research (C)
  • Ministry of Education, Culture, Sports, Science and Technology (MEXT)

Zitieren

APA

Akiya, N., Miwa, K., Ando, A., Miyaji, N., Yamao, T., Wachi, K., Masubuchi, M., Kimura, S., Ito, R., Komatsu, A., Horikawa, T., Fukushima, K., Okizaki, A., & Miura, S. (2026). Impact of software tools and kinetic model selection on myocardial blood flow and flow reserve quantitation in 13 N‐ammonia PET. Journal of Applied Clinical Medical Physics. https://doi.org/10.1002/acm2.70605

Vancouver

Akiya N, Miwa K, Ando A, Miyaji N, Yamao T, Wachi K, et al. Impact of software tools and kinetic model selection on myocardial blood flow and flow reserve quantitation in 13 N‐ammonia PET. Journal of Applied Clinical Medical Physics. 2026. doi:10.1002/acm2.70605

BibTeX
@article{Akiya2026,
  author = {Akiya, Naochika and Miwa, Kenta and Ando, Akira and Miyaji, Noriaki and Yamao, Tensho and Wachi, Kaito and Masubuchi, Masaki and Kimura, Shu and Ito, Reiji and Komatsu, Arata and Horikawa, Takuma and Fukushima, Kenji and Okizaki, Atsutaka and Miura, Shiro},
  title = {Impact of software tools and kinetic model selection on myocardial blood flow and flow reserve quantitation in 13 N‐ammonia PET},
  journal = {Journal of Applied Clinical Medical Physics},
  year = {2026},
  doi = {10.1002/acm2.70605}
}
Kostenlos starten →