Development of an automated CBCT‐based simulation‐free platform for expedited palliative radiotherapy on a conventional linear accelerator
Journal of Applied Clinical Medical Physics · 2025
DOI: 10.1002/acm2.14612 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Clinical Medical Physics, 2025. Verfasst von Riley C Tegtmeier und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Radiation Oncology, Mayo Clinic Arizona, Phoenix, Arizona, USA. Hauptthemen laut MEDLINE: Cone-Beam Computed Tomography, Radiotherapy Planning, Computer-Assisted, Palliative Care, Particle Accelerators. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background
Conventional approaches for emergent or expedited palliative radiotherapy (RT) involve the application of cumbersome vendor‐provided solutions and/or multiple patient appointments to complete the RT workflow within a compressed timeframe.
Purpose
This report delineates the clinical development of an in‐house, semi‐automated Cone‐beam computed tomography (CBCT)‐based simulation‐free platform for expedited palliative RT on conventional linacs, intended to supplant existing techniques employed at this institution.
Methods
The internal software, termed SimFree Wizard (SFW), was engineered utilizing a C#‐based application programming interface integrated within the treatment planning system (TPS). Generated scripts were compiled as stand‐alone executables, with a graphical user interface (GUI) customized via an integrated development environment. The platform was conceived as a framework for accelerated CBCT‐based RT, bypassing the requirement for standard simulation imaging. SFW employs full automation where feasible to minimize user intervention, supplemented by graphical instructions for tasks requiring manual execution. During development, relevant temporal metrics from 10 end‐to‐end tests for palliative spine RT were quantified. User feedback was solicited via a simple questionnaire assessing the overall platform usability. Automated in‐house secondary verification software was developed for validation of the TPS‐calculated monitor units (MUs).
Results
The mean duration for workflow execution was 41:42 ± 3:18 [mm:ss] (range ∼37–46 min). SFW satisfactorily generated simple, multi‐field CBCT‐based 3D treatment plans within seconds following delineation of the desired treatment area. User feedback indicated enhanced usability compared to previously employed solutions. Validation of the secondary verification software demonstrated accurate results for palliative spine RT and other simple cases wherein the dose calculation point resides in a predominantly homogenous medium.
Conclusion
A novel in‐house solution for expedited CBCT‐based RT was successfully developed, facilitating completion of the entire workflow within approximately 1‐hour or less for simple palliative/emergent scenarios. Overall, this application is expected to improve the quality and safety of palliative RT while greatly reducing workflow duration, thereby improving access to palliative care.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Radiation Oncology, Mayo Clinic Arizona, Phoenix, Arizona, USA.
- Department of Radiation Oncology, University of South Florida Health Morsani College of Medicine, Tampa, Florida, USA.
- Department of Radiation Oncology, St. Jude Children's Research Hospital, Memphis, Tennessee, USA.
ORCID-Profile: Riley C Tegtmeier, Yi Rong
Zitieren
APA
Tegtmeier, R. C., Clouser, E. L., Chen, Q., Buckey, C. R., Chungbin, S. J., Kutyreff, C. J., Aguilar, J. S., Labbe, A. L., Horning, B. L., Rule, W. G., Vora, S. A., & Rong, Y. (2025). Development of an automated CBCT‐based simulation‐free platform for expedited palliative radiotherapy on a conventional linear accelerator. Journal of Applied Clinical Medical Physics. https://doi.org/10.1002/acm2.14612
Vancouver
Tegtmeier RC, Clouser EL, Chen Q, Buckey CR, Chungbin SJ, Kutyreff CJ, et al. Development of an automated CBCT‐based simulation‐free platform for expedited palliative radiotherapy on a conventional linear accelerator. Journal of Applied Clinical Medical Physics. 2025. doi:10.1002/acm2.14612
BibTeX
@article{Tegtmeier2025,
author = {Tegtmeier, Riley C and Clouser, Edward L and Chen, Quan and Buckey, Courtney R and Chungbin, Suzanne J and Kutyreff, Christopher J and Aguilar, Jose S and Labbe, Amber L and Horning, Brooke L and Rule, William G and Vora, Sujay A and Rong, Yi},
title = {Development of an automated CBCT‐based simulation‐free platform for expedited palliative radiotherapy on a conventional linear accelerator},
journal = {Journal of Applied Clinical Medical Physics},
year = {2025},
doi = {10.1002/acm2.14612}
}
EUVIMED