EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Optimization of Solid‐State Synthesis Conditions for Li 4 SiO 4 ‐Based Pellets via Calcination Engineering Toward Enhanced CO 2 Capture Performance

Yunlian Liu, Qian Jia, Yuanhui Shen, Ruqi Zhang, Ying Pan, Hongguang Jin

Advanced Chemical Engineering · 2026-07 · 1 (1)

DOI: 10.1002/ache.70004 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Chemical Engineering, online erschienen am 20.07.2026. Verfasst von Yunlian Liu und 5 weiteren Autor:innen. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Li 4 SiO 4 ‐based sorbents are promising for high‐temperature post‐combustion CO 2 capture, but translating high‐performance laboratory powders into mechanically robust industrial pellets remains challenging. Herein, a K─Ti co‐doped Li 4 SiO 4 pellet sorbent was systematically optimized through powder‐stage dopant screening and pellet‐stage calcination engineering. Initially, a comparative study was conducted on powder sorbents co‐doped with K─Al and K─Ti. Results revealed that both Al and Ti were incorporated into the Li 4 SiO 4 framework, thereby optimizing the crystal microstructure and accelerating the reaction kinetics. Among the tested candidates, the K─Li 4 Si 0.95 Ti 0.05 O 4 delivered the highest CO 2 uptake capacity (0.31 g CO2 /g sorbent ) and rapid sorption kinetics under 15%–100% CO 2 . The optimal K─Ti formulation was then fabricated into millimeter‐scale pellets, followed by calcination optimization to balance chemical reactivity and mechanical strength. Physicochemical characterizations demonstrated that calcination at 800°C achieved a favorable equilibrium between chemisorption capability and structural stability. The optimized pellets exhibited high structural integrity, excellent cyclic stability, and sustained high mechanical crushing strength, reducing the risk of pulverization of high‐temperature sorbents. This work provides practical guidance for the microstructure design and powder‐to‐pellet fabrication of Li 4 SiO 4 ‐based sorbents for high‐temperature CO 2 capture, while further process‐level evaluation remains necessary before practical application.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Liu, Y., Jia, Q., Shen, Y., Zhang, R., Pan, Y., & Jin, H. (2026). Optimization of Solid‐State Synthesis Conditions for Li 4 SiO 4 ‐Based Pellets via Calcination Engineering Toward Enhanced CO 2 Capture Performance. Advanced Chemical Engineering, 1(1). https://doi.org/10.1002/ache.70004

Vancouver

Liu Y, Jia Q, Shen Y, Zhang R, Pan Y, Jin H. Optimization of Solid‐State Synthesis Conditions for Li 4 SiO 4 ‐Based Pellets via Calcination Engineering Toward Enhanced CO 2 Capture Performance. Advanced Chemical Engineering. 2026;1(1). doi:10.1002/ache.70004

BibTeX
@article{Liu2026,
  author = {Liu, Yunlian and Jia, Qian and Shen, Yuanhui and Zhang, Ruqi and Pan, Ying and Jin, Hongguang},
  title = {Optimization of Solid‐State Synthesis Conditions for Li 4 SiO 4 ‐Based Pellets via Calcination Engineering Toward Enhanced CO 2 Capture Performance},
  journal = {Advanced Chemical Engineering},
  year = {2026},
  volume = {1},
  number = {1},
  doi = {10.1002/ache.70004}
}
Kostenlos starten →