EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Comprehensive analysis of hazard of ultraviolet radiation emitted during arc welding of cast iron

Jyunya Takahashi iD, Hitoshi Nakashima, Nobuyuki Fujii, Tsutomu Okuno

Journal of Occupational Health · 17.01.2020 · 62 (1)

DOI: 10.1002/1348-9585.12091 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Occupational Health, online erschienen am 03.12.2019. Verfasst von Jyunya Takahashi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Polytechnic University of Japan, Tokyo, Japan. Hauptthemen laut MEDLINE: Welding. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objectives

Ultraviolet radiation (UVR) emitted during arc welding frequently causes keratoconjunctivitis and skin erythema. The extent of the hazard of UVR varies depending on the welding process and conditions. Therefore, it is important to identify the levels of UVR present under different conditions. The purpose of this study was to investigate the degree of hazard of UVR emitted by the different types of arc welding of cast iron frequently used in industry.

Methods

In this study, we experimentally measured the UVR emitted during gas tungsten arc welding (GTAW), shielded metal arc welding (SMAW), and gas metal arc welding (GMAW) of cast iron. The degree of hazard of UVR was quantitatively evaluated in accordance with the guidelines of the American Conference of Governmental Industrial Hygienists.

Results

Effective irradiances measured in this study were in the range 0.045-2.2 mW/cm2 at a distance of 500 mm from the welding arc. The maximum allowable exposure times corresponding to these levels were only 1.4-67 s/day.

Conclusions

UVR emitted during arc welding of cast iron has the following characteristics: (a) It is more hazardous at higher welding currents. (b) The magnitude of the hazard, which depends on the welding process, increases in the order of GMAW > SMAW > GTAW. (c) It is influenced by the filler material used; that is, the components contained in the filler material affect the hazard of UVR. The effect is Fe > Ni, Cr

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

WeldingHumansIronOccupational ExposureUltraviolet Rays

Stichwörter der Autor:innen

arc weldingcast ironeffective irradiancehazardultraviolet radiation

Substanzen

Iron

Autor:innen und Institutionen

  • Polytechnic University of Japan, Tokyo, Japan.
  • Graduate School of Systems Design, Tokyo Metropolitan University, Tokyo, Japan.

ORCID-Profile: Jyunya Takahashi

Zitieren

APA

Takahashi, J., Nakashima, H., Fujii, N., & Okuno, T. (2020). Comprehensive analysis of hazard of ultraviolet radiation emitted during arc welding of cast iron. Journal of Occupational Health, 62(1). https://doi.org/10.1002/1348-9585.12091

Vancouver

Takahashi J, Nakashima H, Fujii N, Okuno T. Comprehensive analysis of hazard of ultraviolet radiation emitted during arc welding of cast iron. Journal of Occupational Health. 2020;62(1). doi:10.1002/1348-9585.12091

BibTeX
@article{Takahashi2020,
  author = {Takahashi, Jyunya and Nakashima, Hitoshi and Fujii, Nobuyuki and Okuno, Tsutomu},
  title = {Comprehensive analysis of hazard of ultraviolet radiation emitted during arc welding of cast iron},
  journal = {Journal of Occupational Health},
  year = {2020},
  volume = {62},
  number = {1},
  doi = {10.1002/1348-9585.12091}
}
Kostenlos starten →